Getting Err 99 on Canon? Follow these steps
- Blog
- September 22, 2022
If your Canon camera is displaying an Error 99 code, it means that there is a problem with the camera’s lens, image sensor, or memory card. There are a few things you can do to try and fix the error. First, try cleaning the lens and image sensor. If that doesn’t work, try formatting the memory card. If the error persists, you may need to send the camera in for service.
Table of Contents
Getting Err 99 on Canon? Follow these steps
What is Error 99?
Error 99 is an error code that indicates a problem with the camera’s lens or with the camera’s connection to the lens. This error can be caused by a number of factors, including a dirty or damaged lens, a faulty connection between the camera and the lens, or a problem with the camera’s firmware.
If you are getting Error 99, we recommend that you follow these steps:
1. Clean the lens contacts.
2. Disconnect and reconnect the lens.
3. Update the camera’s firmware.
4. If the problem persists, contact Canon support.
Steps to Fix Error 99
1. Turn off the camera.
2. Remove the lens and battery.
3. Press and hold the shutter button for about 20 seconds.
4. Reattach the lens and battery.
5. Turn on the camera.
6. Take a picture.
If the error 99 persists, then there may be a problem with the camera’s firmware. In this case, you will need to contact Canon support for further assistance.
Conclusion
Thank you for taking the time to read this article. We hope it was helpful in troubleshooting your Canon camera. As a general rule of thumb, if you are getting an error code on your camera, it is best to consult the manual for that particular model. However, the steps outlined above should help resolve the issue in most cases.
Resources
If you’re getting an error 99 on your Canon camera, there are a few things you can do to troubleshoot the issue. First, try resetting your camera. If that doesn’t work, try cleaning the lens contacts. If you’re still getting the error, it’s possible that the shutter mechanism is damaged and you’ll need to have it repaired.
